‘Navigator’s Passage’ Maple Dining Table SOLD

   $14000   SALE $9900 SOLD

This is our latest and brand NEW design! We named it The Navigator’s Passage because of the many pieces of live edge maple that were placed within the table to create a “passage way”. The sides of this table are straight and smooth and in between all of these beautiful pieces is 4-6mm crushed glass filled with epoxy. It sits on a custom made black aluminum table base with panel ends featuring aluminum sitka trees. (not yet in pictures) It is visually impressive with a lot of character! One of a kind for sure! It would also make a great boardroom table! Seats 8-10 people comfortably.

• 46" W x 92" L x standard 31" H

• Natural satin finish using four coats of lacquer and black epoxy

• Black powder-coated aluminum custom base with aluminum 32” sitka trees on both end panels

• Old Growth Maple sourced from Vancouver Island

• Custom sizes of similar design available upon request.

• WILLOW GROOVE SIGNATURE TABLE

‘Sunset Cove’ Spalted Maple Live Edge Dining Table SOLD

$4400   SOLD

The 'Sunset Cove' Spalted Maple Dining Table has unique 3D features throughout.  It has been finished with oil and then clear lacquer which brings out a lot of character!  This table is narrow and would suit a smaller space nicely. Seats 5-7 comfortably.

• 25" W x 80" L x 29" H

• Coated with high gloss clear laquer finish

• Black powder-coated steel legs on the bias

• This table could also function as a console table or desk

• Sustainably sourced wood slabs from Vancouver Island

• Custom sizes of other Maple designs available

Maple With Crushed Glass Dining Table SOLD

$5400  SOLD

This Maple Live Edge dining table features 4-6mm crushed clear glass in the center with clear and black epoxy.  It has simple live edges along the outside making it contemporary, yet stylish.  Seats 4-6 comfortably. 

• 48" W x 60" L x 30 H

• Custom black aluminum 1' x 3" dining legs

• Crushed 4-6mm clear tempered glass

• Custom sizes of similar design available upon request

'NEW!  ‘FIRE IN THE HOLE’ SERIES MAPLE COFFEE TABLE SOLD

 $2400 SOLD

This is one of our "Fire In The Hole" series coffee tables out of seven that were available.  This piece came from a local maple tree that had a fire run through the center of it and had to come down.  We are designing each one differently and there are only a couple left to design!  These are ONE OF A KIND truly unique pieces of art that will be a center piece in any home or office.

• Approx. 39" diameter and 3.5” thick

• High gloss lacquer finish and crushed glass with epoxy fill in center

• Black custom aluminum 1 x 3 legs

• Maple round sourced from Vancouver Island

• One of a kind!

'Vancouver Island' Maple Dining Table with Crushed Glass Center SOLD

$12500 SOLD

The "Vancouver Island" Maple Bartop Dining Table is all about the character! This unique piece is guaranteed to be talked about wherever it sits!  It's features are endless. Old Growth Maple with some very unique spalting and live edge curves. Clear natural finish with 6mm tempered crushed glass center filled with clear epoxy.  It sits on a custom black powder-coated aluminum base featuring aluminum sitka trees on both side panels.  Bartop Height. There is no table like it.  Literally one of a kind. Designed by Dave Duckworth. Seats 8-10 comfortably.

• 36-49" W x 96" L x 40.5" H

• Natural clear finish with crushed glass center

• Black powder-coated aluminum bartop custom base with aluminum 32” sitka trees on both end panels (can also put the tabletop on a standard height table base)

• Old Growth Maple sourced from Vancouver Island

• Custom sizes of similar design available upon request.

• WILLOW GROOVE SIGNATURE TABLE

Maple Caribbean Ocean River Dining Table (seats 6-8) SOLD

$6900 SOLD

This dining table is unique yet simple. It has a caribbean blue epoxy river center with the live edges of the slabs on the inside of the table and chamfered/straight edges on the outside. It's finished in a satin clear coat and sits on custom black powder coated aluminum legs.  Seats 6-8. See smaller table below that is similar, seats 4-6)

• 84" L x 42" W, standard dining table height

• 1" x 3" custom black aluminum dining legs (other leg style may be chosen)

• Caribbean blue epoxy river center and satin clear coat top finish

• Maple live edge wood slabs sourced from Vancouver Island

‘Three Islands’ Coffee Table

$950 SOLD

The 'Three Islands' Coffee Table is made from old growth cedar, and has black steel powder coated legs on the bias. It gets its name from the three holes on the table top filled and meant to be pronounced in the drastic colour difference. With one live edge and one straight edge, it shows it's modern and rustic sides. Designed by Dave Duckworth.

• 18" W x 56.5" L x 20" H

• Black powder-coated steel legs

• Cedar sourced from Vancouver Island

• Naturally air dried for over 50 years

• Custom sizes of similar design available upon request

‘Ackley’ Garry Oak Island BarTop-SOLD

$2450 SOLD

The 'Ackley' Garry Oak Island Bar Top Table is a unique addition to any kitchen island.  The table top is slightly higher than your island, providing ample amount of room to sit at with plenty of eating space.  This design also makes for beautiful focal point in your kitchen and is a great space for friends and family to hang around.   Designed by Dave Duckworth.

• 22" W x 70" L x H-whatever you like

• Garry Oak live edge wood slabs sourced from Vancouver Island

• This piece could also be designed as a bartop, mantle, coffee or dining table

• Custom sizes available of similar design available upon request

• 'Ackley' means "to dwell at the oak tree meadow"

‘FIRE IN THE HOLE’ SERIES MAPLE COFFEE TABLE 2

$2300 SOLD

 This “Fire In The Hole” Maple Coffee table is one of only seven we had available. This piece came from a local maple tree that had a fire run through the center of it and had to come down.  We are designing each one differently and there are only a couple left to design!  These are ONE OF A KIND truly unique pieces of art that will be a center piece in any home or office.

• Approx 34"-40" diameter and 3.5” thick

• High gloss lacquer finish

• Crushed clear 6mm glass and clear epoxy fill

• Black 1 x 3 coffee table height legs

• Maple sourced from Vancouver Island

• One of a Kind!

‘Silhouette’ Cedar Table  SOLD 

$4800 SOLD

We can make other similar designs!

Maple ‘Caribbean Ocean River’ Dining Table SOLD

$4950 SOLD

This dining table is unique yet simple. It has a caribbean blue epoxy river center with the live edges of the slabs on the inside of the table and chamfered/straight edges on the outside. It's finished in a satin clear coat and sits on custom black powder coated aluminum legs.  Seats 4-6 (see similar table in a larger size above)

• 58" L x 35 1/2" W, standard dining table height

• 1" x 3" custom black aluminum dining legs (other leg style may be chosen)

• Caribbean blue epoxy river center and satin clear coat top finish

• Maple live edge wood slabs sourced from Vancouver Island

‘Ackley’ Garry Oak Coffee Table

$1550 SOLD

'Ackley' means" to dwell at the oak tree meadow".  

• 22" W x 63" L x approx. 20" H

• Natural satin finish using 4 coats of clear laquer

• Black powder coated steel legs

• Garry Oak wood sourced from Vancouver Island.

• This piece could also be designed as an island top, bar top, mantle, or condo style dining table

• Custom sizes available of similar design available upon request

Maple Coffee Table SOLD

$1850        SOLD

This Maple Coffee Table was made with an old growth slab that sat in storage for over 50 years.  This piece is most likely FIRST growth.  We purchased this one of a kind slab from a local retiring woodworker who was selling many pieces that he had held on to for years, because of their unique character.  We have designed it as a coffee table but could also place on higher legs to be a desktop.

• 22" W x 68" L x 18" H

• High gloss lacquer finish

• Black Epoxy fill in cracks

• Black 1 x 3 steel legs

• Maple sourced from Vancouver Island

• One of a Kind!

'Menzies' Arbutus Dining Table SOLD

$4500 SOLD

It is quite rare to find a single live edge slab this wide from an arbutus tree.  This beauty features lots of character knots and beautiful large growth rings throughout.  It's natural cracks and crevices have been filled with black epoxy. It's finished in a satin clear coat and sits on custom black powder coated aluminum legs.  Seats 4-6 people

• 68" L x 32" W, standard dining table height

• 1" x 3" custom black aluminum dining legs

• Satin clear coat finish

• Arbutus sourced from Vancouver Island

Arbutus With Semi Transparent White Epoxy Table with Extension SOLD

This custom arbutus table was created for clients that wanted a table that could be extended. They wanted to have it be longer when they are hosting company and when they are not hosting, they plan to use the table as a coffee bar!

• 115” L x 42”W. Standard Dining Table Height. + Extension Table 24” L x 42” W

• Opaque semi transparent white epoxy

• Custom white powder coated metal leg base and legs to match

• Local Arbutus

• ONE OF A KIND